The Rinnai INFINITY HD200 External continuous flow gas hot water heater is preset to 75°C with a status monitor. The status monitor has an added feature of displaying an LC (00) error code when unit requires cleaning (due to scale build-up).
Water Connections: 3/4" / 20mm
Gas Connection: 3/4" / 20mm
Frost Protection: Fitted as standard. Frost protection operates automatically, as long as the unit is connected to the power supply, by activating when the temperature inside the unit drops below 3.5C and turns off again once the temperature reaches 7C
Ignition System: Direct Electronic Ignition
Line Pressure Min-Max
Noise Level: 50dB (A)
Frost Protection: 100W
Pressure Relief Valve
Combustion Fan RPM Check
Water Supply: 130-1000kPa
Dimensions: H636 x W350 x D250mm
Please Note: If the inlet water pressure or flow rate drops below the minimum values stated above, operation of the INFINITY is not guaranteed. The unit requires both minimum flow rate and pressure to operate correctly.
Warranty: Heat exchanger 10 years, all other parts 5 years