The Rinnai INFINITY HD250 is a temperature controlled continuous flow gas hot water system for external applications. Factory preset to 55°C.
Water Connections: 3/4" / 20mm
Gas Connection: 3/4" / 20mm
Exhaust System: Forced Flue
Frost Protection: Fitted as standard. Frost protection operates automatically, as long as the unit is connected to the power supply, by activating when the temperature inside the unit drops below 3.5C and turns off again once the temperature reaches 7C
Ignition System: Direct Electronic Ignition
Line Pressure Min-Max:
Noise Level: 49dB (A)
Normal Operation: 72W
Frost Protection: 116W
Pressure Relief Valve
Combustion Fan RPM Check
Water Supply: 200-1000kPa
Dimensions: H644 x W470 x D244mm
Please Note: If the inlet water pressure or flow rate drops below the minimum values stated above, operation of the INFINITY is not guaranteed. The unit requires both minimum flow rate and pressure to operate correctly.
Warranty: Heat exchanger 10 years, all other parts 5 years