is here! Shop now, pay later in 4 easy installments
The Rinnai INFINITY A-Series are continuous flow hot water systems for residential applications. These water heaters produce endless hot water, and unlike electric cylinders, are energy efficient as they are only on when you need hot water.
The Rinnai INFINITY A-Series are continuous flow hot water systems for residential applications. These water heaters produce endless hot water, and unlike electric cylinders, are energy efficient as they are only on when you need hot water.
Designed and made in Japan, the Rinnai INFINITY A-series are continuous flow gas hot water heaters with inbuilt frost protection. They have electronic ignition and require electricity to operate.
- Suitable for mains and medium pressure residential applications.
- They are designed to be externally mounted on an outside wall and located as close as practicable to the most frequently used hot water outlet(s), to reduce the delay for hot water delivery.
- They are not suitable as a spa or swimming pool heater.
- They are not suitable for commercial installations.
- They are also not suitable as a gas boost for solar installations, or connection with an iHeat, as the temperature cannot be set high enough.
- Hard or acidic water will need to be treated to use this product.
There are four models to choose from depending on your hot water needs. Model numbers represent hot water capacity, for example the A26 produces 26 litres of hot water per minute at a 25 ° Celsius rise.
Please Note: If the inlet pressure or flow rate drops below the minimum values stated above, operation of the INFINITY is not guaranteed. The unit requires both minimum flow rate and pressure to operate correctly.
| Specifications | |
|---|---|
| Available fixed temperatures | 40C, 42C, 50C, 55C, 60C, 65C (Factory Preset 55C) |
| Exhaust Type | Forced Flue |
| Frost Protection | Fitted as standard. Frost protection operates automatically, as long as the unit is connected to the power supply. Frost protection activates when the temperature inside the unit drops below 3.5C and turns off once the temperature reaches 7C. |
| Ignition System | Direct electronic ignition |
| Line Pressure Min-Max (LPG) | 2.75 - 3.5kPa |
| Line Pressure Min-Max (NG) | 1.13 - 3.5kPa |
| Power Consumption |
Standby: 2W A16: 47W A20: 58W A24: 56W A26: 66W Frost Protection: 68W |
| Pressure Relief | Valve Opens at 2060kPa, Valve Closes at 1479kPa |
| Noise Level | 50dB(A) |
| Safety Devices |
Flame failure Boil dry protection Overheat protection Fusible link Pressure relief valve Combustion fan RPM check |
| Warranty | Heat Exchanger 10 years, all other parts 3 years |
| Models | A-16 | A-20 | A-24 | A-26 |
|---|---|---|---|---|
| Hot Water Capacity | 1.5-16L/Min | 1.5-20L/Min | 1.5-24L/Min | 1.5-26L/Min |
| Input | 16.3-124MJ/h | 19.9-156MJ/h | 16.3-184MJ/h | 16.3-199MJ/h |
| Output | 27.8kW | 34.9kW | 42.0kW | 44.5kW |
| Water Supply Min-Max | 120-1000kPa | 160-1000kPa | 200-1000kPa | 200-1000kPa |
| Water Connections | 1/2" / 15mm | 3/4" / 20mm | 3/4" / 20mm | 3/4" / 20mm |
| Gas Connection | 3/4" / 20mm | 3/4" / 20mm | 3/4" / 20mm | 3/4" / 20mm |
| Dimensions (mm) | H498 x W351 x D195 | H498 x W351 x D195 | H498 x W351 x D195 | H498 x W351 x D195 |
| Weight | 13kg | 14kg | 15kg | 15kg |
The Rinnai INFINITY A-Series are continuous flow hot water systems for residential applications. These water heaters produce endless hot water, and unlike electric cylinders, are energy efficient as they are only on when you need hot water.
The Rinnai INFINITY A-Series are continuous flow hot water systems for residential applications. These water heaters produce endless hot water, and unlike electric cylinders, are energy efficient as they are only on when you need hot water.
Designed and made in Japan, the Rinnai INFINITY A-series are continuous flow gas hot water heaters with inbuilt frost protection. They have electronic ignition and require electricity to operate.
- Suitable for mains and medium pressure residential applications.
- They are designed to be externally mounted on an outside wall and located as close as practicable to the most frequently used hot water outlet(s), to reduce the delay for hot water delivery.
- They are not suitable as a spa or swimming pool heater.
- They are not suitable for commercial installations.
- They are also not suitable as a gas boost for solar installations, or connection with an iHeat, as the temperature cannot be set high enough.
- Hard or acidic water will need to be treated to use this product.
There are four models to choose from depending on your hot water needs. Model numbers represent hot water capacity, for example the A26 produces 26 litres of hot water per minute at a 25 ° Celsius rise.
Please Note: If the inlet pressure or flow rate drops below the minimum values stated above, operation of the INFINITY is not guaranteed. The unit requires both minimum flow rate and pressure to operate correctly.
| Specifications | |
|---|---|
| Available fixed temperatures | 40C, 42C, 50C, 55C, 60C, 65C (Factory Preset 55C) |
| Exhaust Type | Forced Flue |
| Frost Protection | Fitted as standard. Frost protection operates automatically, as long as the unit is connected to the power supply. Frost protection activates when the temperature inside the unit drops below 3.5C and turns off once the temperature reaches 7C. |
| Ignition System | Direct electronic ignition |
| Line Pressure Min-Max (LPG) | 2.75 - 3.5kPa |
| Line Pressure Min-Max (NG) | 1.13 - 3.5kPa |
| Power Consumption |
Standby: 2W A16: 47W A20: 58W A24: 56W A26: 66W Frost Protection: 68W |
| Pressure Relief | Valve Opens at 2060kPa, Valve Closes at 1479kPa |
| Noise Level | 50dB(A) |
| Safety Devices |
Flame failure Boil dry protection Overheat protection Fusible link Pressure relief valve Combustion fan RPM check |
| Warranty | Heat Exchanger 10 years, all other parts 3 years |
| Models | A-16 | A-20 | A-24 | A-26 |
|---|---|---|---|---|
| Hot Water Capacity | 1.5-16L/Min | 1.5-20L/Min | 1.5-24L/Min | 1.5-26L/Min |
| Input | 16.3-124MJ/h | 19.9-156MJ/h | 16.3-184MJ/h | 16.3-199MJ/h |
| Output | 27.8kW | 34.9kW | 42.0kW | 44.5kW |
| Water Supply Min-Max | 120-1000kPa | 160-1000kPa | 200-1000kPa | 200-1000kPa |
| Water Connections | 1/2" / 15mm | 3/4" / 20mm | 3/4" / 20mm | 3/4" / 20mm |
| Gas Connection | 3/4" / 20mm | 3/4" / 20mm | 3/4" / 20mm | 3/4" / 20mm |
| Dimensions (mm) | H498 x W351 x D195 | H498 x W351 x D195 | H498 x W351 x D195 | H498 x W351 x D195 |
| Weight | 13kg | 14kg | 15kg | 15kg |
100% KIWI OWNED & OPERATED
LOCAL KNOWLEDGE & EXPERTISE
LARGEST OFF-GRID PRODUCT RANGE IN NZ
