The Rinnai Infinity Compact Controller is the smallest most affordable controller available for your Rinnai Infinity Water Heater. This controller can be installed anywhere inside your house making it a simple and effective temperature controller.
Digital controllers allow you to select the exact temperature of the hot water at the tap within the controller temperature range.
Dimensions (mm): 120H x 90W x 20D
All controllers come with 10m of cable
Available Temperature Settings: 37-46, 48, 50, 55 °C (60, 65, 70, 75 °C for HD models)
IP Rating: Rinnai controllers are not IP (Waterproof) rated. The controllers are low voltage (12 V DC) from the Rinnai INFINITY via a cable to the controller. Rinnai does not recommend placing a controller where they will get wet from a shower head, tap or water fixture. They are water resistant, not water proof
Safety, especially if you have young children, the hot water can be preset to a child-safe level
No need to mix hot and cold water, this reduces the affect of temperature spiking when another tap in the building is turned on
You use your continuous flow unit more efficiently as less gas is required to heat water to 40 °C (typical shower temperature) than at 55 °C (default temperature without controllers)
Allow diagnosis of problems (such as gas supply disruption) in the unlikely event of a fault, or for a maintenance review when the INFINITY is serviced.
Extended warranty: Rinnai INFINITY installations, when a controller is installed receive an extra two years on the INFINITY warranty.